iformat.io ロゴ iformat.io
iformat.io ロゴ iformat.io

MP3 to WAV Converter

Convert MP3 to WAV online for free. Fast, private, no signup, no watermark — high-quality MP3-to-WAV conversion in your browser.

MP3 ファイルをここにドロップします
または、このボックス内の任意の場所をクリックしてファイルを選択します

最大ファイルサイズは10MBです。 サインアップ さらに詳しく。

What to expect when converting MP3 to WAV

一般的なファイルサイズの変更
5–10× larger

A 4 MB MP3 (3-minute song at 192 kbps) typically becomes 30 – 35 MB as 16-bit/44.1 kHz WAV.

品質: WAV is lossless but cannot recover quality lost in MP3 encoding — the conversion preserves whatever the MP3 contains.

以下に最適: audio editing in studio software, archival, hardware that requires WAV (some DJ controllers).

次の場合は避けてください。 you only need to play the file — MP3 is universally supported and far smaller.

ヒント: Converting MP3 to WAV does not improve audio quality. To get truly lossless audio you need a lossless source (FLAC or the original master).

実際の使用例

MP3 to WAV — Compressed → uncompressed for editing / production

MP3 → WAV is the conversion audio editors want — DAWs (Logic, Ableton, Pro Tools, GarageBand) all work in WAV natively, and importing MP3 forces an internal decode. Note: converting a lossy MP3 to WAV does NOT recover the audio quality lost in the original compression. You get a large file that's still limited by the source MP3's quality. WAV is 10-15× larger than the MP3.

出力形式について

When WAV is the right output

WAV is uncompressed lossless audio — pristine but large (~10 MB per minute at CD quality). Convert to WAV when your destination is audio production (DAWs like Logic, Ableton, Pro Tools all use WAV natively), voice-over delivery, or when a broadcaster / stock-audio marketplace specifies uncompressed. Never for casual listening — file sizes make no sense.

Convert MP3 to WAV with sensible quality defaults

オーディオ変換は高速で、通常は 1 トラックあたり 1 ~ 2 秒かかります。ツールが豪華であることよりも、最初に適切な設定を行うことが重要です。

  1. 1

    Upload one file or a whole batch

    Free-tier uploads are capped at 10 MB per file — fine for voice memos, short songs, and podcast segments; tight for lossless music or long recordings. Pro handles files up to 1 GB and batches of up to 20 tracks at once, which comfortably covers a whole mixtape or a podcast season.

  2. 2

    Pick a bitrate that fits the use case

    The tool defaults to a reasonable target for WAV. Override only when you have a reason: lower bitrate for spoken content that doesn't need fidelity, higher for music that will be listened to on good headphones. If the target is lossless (WAV, FLAC, AIFF), there's no bitrate slider — every sample is preserved.

  3. 3

    変換してダウンロード

    The result is ready in a couple of seconds. Individual files download directly; batches ship as a ZIP with original filenames preserved. Both the source and the converted files are permanently deleted from our servers within 30 minutes.

What's preserved in the trip from MP3 to WAV

Audio content itself, sample rate (unless you override), bit depth (unless you override), channel count (mono/stereo/5.1 where the target supports it), and metadata tags (artist, album, title, year, embedded artwork) all carry through. The only thing that changes is the compression method used to store the audio.

Things people learn once and then never forget

  • Higher bitrate on a lossy source is wasted. Converting a 128 kbps MP3 to 320 kbps produces a bigger file with no audible improvement. The information is already gone.
  • Match sample rate to destination. Video audio is almost always 48 kHz. CD-style playback is 44.1 kHz. Mismatched rates can cause subtle desync in long files.
  • Metadata carries — mostly. ID3 tags survive between most modern formats. Older or unusual formats (WMA, AIFF) may drop some fields; check embedded artwork after conversion if that matters to you.
  • Voice doesn't need music-grade quality. Spoken content is transparent to most listeners at 96-128 kbps. Higher just makes bigger files without an audible difference.

When MP3 to WAV is the right move

Six practical reasons to swap audio formats — grounded in real workflows.

Publishing a podcast

Podcast hosts accept MP3 universally, AAC widely, and lossless formats rarely. Converting your editor's output to WAV produces exactly what your host expects — no re-encoding on their side, cleanest listener experience.

Feeding a DAW that hates compressed audio

Ableton, Logic, Pro Tools, and other pro audio tools work best on uncompressed formats. Converting MP3 to WAV (or ALAC, or AIFF) before importing means the DAW isn't decoding on every playback, and further edits don't compound generation loss.

Archiving a music library efficiently

Uncompressed WAV files eat disk. Converting a 100-album collection to FLAC halves storage without any quality loss — decode FLAC back to WAV whenever needed, get bit-identical audio. If archival is the goal, FLAC is almost always the right target.

Prepping voice for transcription

Speech-to-text APIs prefer specific input formats — usually MP3 or WAV at 16 kHz mono. Converting to WAV at those specs before upload makes the API accept the file first-try and process it faster.

Making a phone recording playable everywhere

iPhone のボイスメモは M4A として保存され、ほとんどのプレーヤーはこの形式で開きますが、一部の古いツールでは拒否されます。 Android やその他の携帯電話は、さまざまなコンテナ形式で保存します。広くサポートされている WAV に変換すると、受信者が使用するものであれば何でも録音が開かれることになります。

Meeting a platform or service spec

Radio stations, streaming platforms, and game engines each publish audio specifications — sample rate, bit depth, channel layout. Converting to WAV at the spec-matching settings is a common last step before submission.

MP3 vs WAV: Side-by-side

2 つの形式の技術的な比較 - どちらを使用するかを決定する場合、または変換中に何が変更されるかを確認する場合に役立ちます。

プロパティ MP3 WAV
フルネーム MPEG-1 Audio Layer III Waveform Audio File Format
導入年 1993 1991
開発者/標準ボディ Fraunhofer / MPEG IBM / Microsoft
MIMEタイプ audio/mpeg audio/wav
ファイル拡張子 .mp3 .wav
圧縮 Lossy (MDCT) Uncompressed PCM (typically)
カラー/データ深度 N/A (audio) N/A (audio)
最大寸法/サイズ Up to 320 kbps bitrate 4 GB file size limit (RIFF)
透明性 いいえ いいえ
アニメーション いいえ いいえ
規格・仕様 ISO/IEC 11172-3 Microsoft RIFF
こんな方に最適 Universal audio compatibility — playable on every device Studio recording, raw audio, professional editing

MP3フォーマットについて

MP3 (MPEG-1 Audio Layer III) は、フラウンホーファー研究所によって開発され、1993 年に標準化されました。現存する中で最も広くサポートされているオーディオ形式です。 MP3 は知覚非可逆圧縮を使用しており、人間が聞き取りにくい音を破棄することで機能します。この心理音響アプローチにより、知覚されるオーディオ品質を維持しながら、ファイル サイズが大幅に削減されます。

192 ~ 256 kbps のビットレートでは、ほとんどのリスナーは MP3 ファイルと元の非圧縮録音を区別できません。このため、MP3 は、音楽配信、ポッドキャスト、オーディオブックなど、小さなファイル サイズと広範な互換性が優先されるあらゆるシナリオに最適です。 192 kbps の一般的な 4 分間の曲は約 5 MB を占有しますが、非圧縮 WAV 形式では 40 MB を超えます。 AAC や Opus などの新しい形式は、ビットレートを低くしても優れた品質を提供しますが、すべてのデバイスとオペレーティング システムにわたるユニバーサル再生をサポートするには、依然として MP3 が最も安全な選択肢です。

Audio Format Guides for MP3 to WAV Converter

Read playback, quality, file-size, and format-compatibility guides related to MP3 to WAV Converter.

MIDI 作品をオーディオとして共有するためのミュージシャン向けガイド

あなたは MIDI で素晴らしいものを書きましたが、それを送信した相手には正しく聞くことができません。ここでは、MIDI 作品を誰でも演奏できるオーディオに変換する方法を説明します。

MIDI to MP3: MIDI ファイルをリアルオーディオに変換する方法

MIDI ファイルは実際にはサウンドではなく、一連の命令です。その意味と、どこでも本物のオーディオとして再生できるように MIDI を MP3 に変換する方法を説明します。

オーディオブック ライブラリを Apple から移動する方法 (M4B から MP3)

オーディオブックは Apple の M4B 形式のままであり、新しい携帯電話やアプリに追従しません。ライブラリ全体を持ち歩く方法は次のとおりです。

ロスレスオーディオの説明: FLAC、ALAC、APE、WAV

FLAC、ALAC、APE、WAV — これらはすべて「ロスレス」ですが、なぜこれほど多くあるのでしょうか?それぞれが何であるか、どのように異なり、ライブラリにどれを選択すればよいかを以下に示します。

APE および ALAC ファイルは再生できませんか?どこでもロスレスオーディオを開く方法

ロスレス アルバムをダウンロードし、.APE または .ALAC ファイルを取得しても何も再生されませんか?その理由と、任意のデバイスで開く方法を次に示します。

3GA ファイルとは何ですか? Samsung 音声録音を開いて再生する方法

Samsung 携帯電話から音声録音を転送したところ、コンピューターで再生できない .3GA ファイルが見つかりましたか?これが何であるか、そしてそれを開く方法は次のとおりです。